Stilettos are known for their fast action, thin profiles, and symmetrical spear point blades. Bear OPS has created a smaller sized Stiletto folder that will serve you as an excellent EDC utility knife. The best thing about this knife, besides the S30V blade of course, is the lightweight yet strong aluminum handles. They’re shaped eerily similar and have the same anodized feeling as the Benchmade 940/943 and comes with a reasonably deep carry pocket clip. Take the Reaper Z handles or leave them, it’s up to you. For my money they’re something different in the collection so fine by me. This knife features a liner lock, smooth fast action, and flow-through design for easy cleaning. Proudly made in Alabama, this knife is available at www.knifecenter.com.
About Bear OPS, a Division of Bear & Son Cutlery: Continue Reading
CRKT has been pumping out the Brian Tighe designs hard and fast recently, and for good reason. Each and every model he comes up with is refreshingly different and once you get one in the hand, is hard to put down. The two newest to arrives through the KnifeCenter doors are the Tighe Coon and Tighe Dye folders. They both have flipper mechanisms, gray aluminum handles, button locks, and reasonably deep carry pocket clips. However, apart from these material similarities, they really are quite different designs. The Dye model is a single edged version of an Italian Stiletto, but the handle provides a much more stout feeling for more demanding cutting tasks. The Tighe Coon knife is ultra smooth opening with a slightly recurved drop point blade for better slicing performance. Both knives feature mirror polished AUS-8 blades and are built like tanks. Check out these Tighet new knives at www.knifecenter.com.
More about the Designer Brian Tighe: Continue Reading
Here at the KnifeCenter, we strive to offer you the best edged tools available and we believe these Akribis folders fit that bill nicely. Spartan Blades is well known in the industry for their stout, well built fixed blade designs. The fit and finish on any Spartan Blade is very Chris Reeve-esque with great attention paid to the ergonomics and cutting angle of each knife. The Akribis is their first folding knife and we are very excited about this one. It features titanium handles, with a Rick Hinderer lock bar stabilizer, available in meteorite grey or flat dark earth and your choice of G10 or carbon fiber scales. The 3-1/2″ blade is made from S35VN stainless steel and also comes in your choice of a meteorite grey or black PVC blade coating. The opening action is buttery smooth and the loud click of the lock bar engaging is one sweet sound you’ll definitely appreciate. This is a hard use, tactical folder that’s as at-home in your jeans or khakis as it is on your LBE. There’s no doubt you will be proud to show this knife off to your friends, check them all out at www.knifecenter.com.
More about Spartan Blades: Continue Reading
With two new flippers in two successive years, Spyderco must be trying to change their Trademark Hole or something fishy is going on. Flippers keep gaining popularity with knife knuts because they’re easier and are in some cases faster to open. The addition of an assist mechanism or ball bearing system gives you the peace of mind that the blade will open quickly and do so completely, every time. The Domino is just this kind of knife with buttery smooth bearings, making it very fun to play with. In use, it’s like any other Spyderco – just made to cut things! The CTS XHP steel is among the best in performance on the market due a high hardness and edge holding capability. The best thing about it though, is something you cannot see; the ease at which it can be resharpened. Hard steels like D2 and ZDP perform very well until they get dull. That’s when you either have to spend an hour working on the edge or send it out to get professionally sharpened. Not so with XHP. It’s fine particle metallurgy and high chromium content makes sharpening easier while also boosting its corrosion resistance. The Chris Reeve Integral frame lock (with replaceable lock bar insert), four-position pocket clip, and carbon fiber laminate handle are just other parts of this very well manufactured product. Check out the new Spyderco flipper at www.knifecenter.com.
More from Spyderco about the Domino: Continue Reading
The Model 0300 was Zero Tolerance’s first ever knife, co-designed by Ken Onion and Mick Strider, and it became an immediate success in the realm of hard use folding knives. ZT has separated themselves from the competition by using only the best available materials and manufacturing stout tactical knives to some of the tightest tolerances in the industry. The handle of the 0300 is a large 5-1/4″, made from machined G10 with a titanium frame lock. It’s got great jimping for your thumb in both the forward and reverse grips, much like a Strider Knife, which is functional even with gloves on. The 3-3/4″ S30V blade features the new Blackwashed finish which is best described as a DLC (diamond-like carbon) finish that been tumbled (or stonewashed) for a non-reflective, broken-in look. The Model 0300 was such a popular design that it spawned a smaller brother, the 0350 with all G10 handles, that continues to be among the most popular knives ZT manufacturers. Blackwash is the same finish as the Acid Stonewash by Brous Blades and seems to be where manufacturers are heading for a durable, non-reflective finish on high end knives. Check out the new Zero Tolerance 0300 at www.knifecenter.com.
More from Zero Tolerance Knives: Continue Reading
If you’re looking for a conversation starter, something that will impress each and every person you show it to, this is it! True, many people will scoff at it or ask you what happens when you encounter a TSA agent with this in your pocket, but that’s neither here nor there. It’s the convenience of having a blade with you at all times, even if you forget your EDC knife, and ease of which you can remove the case with the torx bit it comes with that makes this an excellent product. All you have to do is pop out the four corner screws and viola, you’re in business. I’ve had my TactiCall for a little over a month now and after you get used to the added weight, it really becomes a highly useful and functional tool. I was wary at first that the bottle opener would apply too much force to the back side of the phone and could break it, but that’s definitely not the case, ha. The opener is strongly reinforced by the design of the case and it pops the tops off quickly and effectively the first time, every time. The knife comes as sharp as any karambit blade out there and locks up solidly right out of the packaging. The pivot is adjustable if any play develops using the same supplied torx tool as you use to remove the case, so you always have a properly functioning knife. This is a very useful product and does an excellent job protecting your iPhone 5, check it out at www.knifecenter.com.
A long-lasting friendship with some of the insiders at QTRM5TR Knives has allowed Knifecenter a very unique opportunity. QTRM5TR has just recently introduced it’s “second season”. This time, QTRM5TR has decided to pay homage to another pop culture favorite television show from the 80’s. Set in Hawaii, and filling our heads with images of scantily clad beach bunnies and Ferrari’s; the show has left a lasting impression with a lot of us males, aged 30-60.
At first discovery, the names seem strange, but once the overall theme is realized, it’s quite amusing and certainly a unique way to draw a kinship with their customer base. The names of the knives hardly matter at all once it’s in your hand. The angular, modern and industrial stylings of their knives are attractive and unique, but the surprisingly comfortable ergonomic-grip in the midst of all the angles and edges is remarkable.
The use of a new Carpenter Alloy in these knives is a great choice. We’ve received stellar reviews of the CTS XHP alloy and their newest air-hardened, high-carbon, chromium steel offering certainly won’t disappoint either. CTS BD4P alloy is a high-performance blade steel offering a fine, uniform carbide structure yielding excellent edge retention and grinding/polishing characteristics.
All in-line QTRM5TR Knives come equipped with the ORB® pivot system and tri-spoke pivot assembly: These two features will continue to further separate this new American brand from its competition and allow them to yield more popularity in the years to come. The folders are so smooth and lock up is so solid that you’d think they were customs that were triple the price. Get them now. We bought the entire run of pre-production examples, no one else on earth has these knives for sale.
A Little Background About QTRM5TR Knives: Continue Reading
Very Spyderco Vallotton and Starmate-esque, the new Boker Plus Squail is a large tactical folder with serious style. The designer, Charles Marlowe, is known for combining function with elegance in all his designs, whether they be tactical or utility in nature. The Squail features a large 4″ 440C blade that is beautifully stonewashed and has a nice-sized thumb hole for easy actuation. The handles are linen Micarta paired with matte finished titanium bolsters for a refined looking and feeling knife. The jimping on the spine is very sharp for excellent purchase and the liner lock, though not grooved like it is in the picture, does lock the knife up with no play whatsoever. This is another awesome piece from Boker Plus and their decision to go with production versions of custom knife designs is paying off with some really excellent products. Keep your eyes peeled for more new designs and check out this handsome new tactical knife at www.knifecenter.com.
More From the Designer: Continue Reading
The Barrage was Benchmade’s first ever AXIS lock model to incorporate an assisted opening mechanism and it’s continued to be a very popular design, even four years later. The model 581 was introduced in 2011 with the same specifications as the model 580 but with some nice material upgrades. The FRN handle was changed to G10 with stainless steel bolsters and the blade steel was upgraded to M390 super steel, providing a much better using steel while losing little of the stainless qualities 154CM steel provides. Now, in 2013 you can get the Mini Barrage with the same upgrades as the model 581 – the new 586. They’ve got 2.91″ drop point blades with either a nice stonewashed finish or the black BK2 coating. You can’t go wrong with any Benchmade design but if assisted openers are your thing, then the new model 586 is a superior EDC choice. Check it out at www.knifecenter.com.
A Little More From Benchmade: Continue Reading
The Mantis Vuja De is finally here at the KnifeCenter and what a cool knife this is! The butterfly karambit – many people thought it couldn’t be done but the genius behind Mantis and QTRM5TR Knives, Jared West, has pulled it off and executed it well. It features a very cool and effective button that locks the knife in both the open and closed positions. It’s not really designed for practicing your flipping tricks as the lock automatically engages when the knife becomes completely open. It could flip smoother, like a Benchmade 51 or 62, and it could be a little sharper like an Emerson Karambit but it really is nothing like those other knives. It’s in a class all its own with a 2″ M-VX steel hawkbill blade and 7″ overall profile including the rear finger hole so you’ll never have the problem of guessing which one the safety handle is again. Karambits are tactical, defense specific tools and the Vuja De by Mantis Knives is no different, plus it has the cool added feature of being a Bali-Song flipper. Check it out at www.knifecenter.com.
More about Mantis Knives and M-VX Steel: Continue Reading